|
RS232 to TTL Converter 5V MAX232 Based Breadboarding/Student Kit Price - £2.69 + £1.95 Delivery = £4.64 Total = £5.45 Delivered to the UK within 2-4 working days! (if 2nd Class option chosen, otherwise faster!) This is a Serial port / PC interfacing kit for robotics and microcontroller based projects. This is supplied in kit form for educational purposes or for those on a budget. Very popular with schools, colleges and hobbyists! * High speed, replaceable MAX232 based. Device fitted supports upto 120kbps. * Works with PCs or Laptops. * Supports 5-wire interface i.e. handshaking (RTS/CTS) signals also * +5V signal levels at the TTL level. * Ultra low current power status LED * Suitable for interface to Microchip PIC, Atmel AVR and other such micros. * Single 5V supply required via header. * 1 x DB9 Female serial port connector * 1 x DIL socket (for MAX232 device) * 1 x ultra low current red LED (for power status) * Basic electronics knowledge e.g. observing polarity of components. * Soldering iron, soldering skills, 5V supply etc... Once assembled - very handy for breadboarding! Pin 1: GND - this pin is the ground pin. This pin is usually connected to the 0V rail of the application hardware. Pin 2: VCC(+) - this pin requires 5V to be supplied to the board for power. Pin 3: RX (input - from UART into PC) - this pin is usually connected to the TX output pin of the UART in the microcontroller. This is an input pin. Pin 4: TX (output - from PC to UART) - this pin is usually connected to the RX pin of the UART in the microcontroller. This is an output pin and will be data from the RS232/PC side of the converter. Pin 5: CTS (input - from UART into PC) - this pin is part of the RS232 "Hardware Flow Control" system. Normally this signal is used by the UART to flag to the PC when the UART is ready to receive data. However, because of the various interpretations of the RS232 "standard", the exact way this signal may be used will change from system to system. Pin 6: RTS (output - from the PC to the UART) - this pin is part of the RS232 "Hardware Flow Control" system. Normally this signal is used by the PC to flag when the microcontroller can send data. However, because of the various interpretations of the RS232 "standard", the exact way this signal may be used will change from system to system. This is in a Kit form - Soldering Required! Free RS232 Terminal software for use with this RS232 to TTL Module Supplied for viewing com port data and controlling serial devices such as a DACIO module. C++ source code of serial comms routines provided for creating your own applications. Royal Mail 2nd Class : £1.95 + VAT (£2.29 Inc VAT) RM 1st Class Recorded : £2.95 + VAT (£3.47 Inc VAT) Special Delivery/Citylink : £5.95 + VAT (£6.99 Inc VAT) Delivered Time: Within 1-4 Working days depending on option selected! ~~~~ Next Working Day Delivery Cut Off Time is: 2PM ~~~~ First Item: £3.95 + VAT (4.64 Inc VAT) Additional Items: £1.95 + VAT (£2.29 Inc VAT) Delivered Time: Within 3-7 Working days Additional Items: £1.95 - NO VAT! Delivered Time: Within 5-10 Working days Please note Tronisoft Limited is a VAT registered company and therefore VAT is charged at 17.5% during checkout for UK and European Orders. No VAT charged for worldwide orders! Certain images/photos are the copyrighted property of JupiterImages and are used with permission under license. NEED HELP BUILDING THE DEVICE - SEE OUR ASSEMBLY GUIDE! RS232 to TTL Kit Assembly Guide (RS232 / serial to ttl 5V MAX232 based (student) kit uk is the responsibility of Raquel Bush) |
Raquel-bush@cedar--rapids.com (Raquel Bush) for more information.
