|
AVR JTAG STK500 2 IN 1 USB EMULATOR PROGRAMMER 1. Both USB and serial port can be used for JTAG ICE emulation and STK500 ISP. 2. JTAG interface can be used for emulation, supports AVRStudio, JTAG emulation function same as ATMEL JTAGEICE first edition, support some devices as it does. Til 2005.11.1?it supports? AT90CAN128 / AT90CAN128L?ATmega16 / ATmega16L?ATmega162 / ATmega162V?ATmega169 / ATmega169V?ATmega32 / ATmega32L?ATmega323 / ATmega323L?ATmega64 / ATmega64L?ATmega128 / ATmega128L? 3. JTAG can be used for ISP and set fule bit etc. 4. run at ISP mode, it can be recognised by STK500 software?Current there are many compliers support STK500, such as ICCAVR etc.) it also support future AVR devices, and support AT86RF401/AT89S51/AT89S52?STK500 is only officially suggest ISP mode and 10 times faster than parallar ISP. it is default set 115.2k burning speed in order to match different AVR default vales and you could modify buring speed base on MCU clock source. AT 8M clock source, it support burning speed upto 1.845M, faster than mkII-ISP. 5. A ISP interface can be used for programme target board. Differ from JTAG, JTAG occupied I/O resource. (such as target AVR MCU is ATmega16, PC2-PC5 I/O will be used. Feather more, using JTAG can not recover some fules,such as JTAGEN=0, (emulation not allowed), so JTAG interface can not be used for debug and programme. whereas STK500 can? 6.STK500 have an unlock function?using its to debug your code such as testing ICP, frequency counter etc. 7.JTAG and STK500 's firmware can be updated automaticaly, in order to JTAG STK500 supply future AVR devices. If a new version of AVRStudio is used?please update related firmwares. 8.In the case, the monitor programme inside JTAG lost, you can use STK500 recover it. 9.Multiple power sources?by default, this device gain power from target board, target must have power supply?alternativly, you can use USB power this device and target board( need config an internal switch) Note: due to USB have limit power supply capacity, if your target board need an over 500MA power supply, please choose a external power supply. ???latest AVR devices will be supported via update firmware; 2. Easy switch from ICE to ISP? ??not like others, it won't happen that after use ICE, ISP can not function;? 3. support low voltage emulation;?? support target AVR MCU power from1.8 to 5.5V?thus be able to emulate AVR device modules with “Lâ€and“V â€; 4. software support?AVR Studio (emulation and ISP) * Software: AVR Studio ver 4.6 (for windows98se/2000/ME/XP) 1. AVR JTAG STK500 2 IN 1 host 5. 1*10PIN-6PIN convert cable 3. Correct and sufficient corresponding information Moneybookers No personal cheque, banker's draft, postal order will be accept. 2. When you receive your order 1. Tracking order online or by phone We will sent an email which contains a tracking number along with the carrier's name after your order departured. So you could tracking your order online or by phone. 2. Contacting us when delivery go wrong. All our Programmers are provided one year warranty by us from the date you make a purchase. An replacement will be provided by us for free when a faulty is developed within the warranty. A free carrier's account will be provided to return the faulty parts within the first year. 2. Warranties from manufacturers After the first year, the manufacturers will provide rest warranty see related manufacturers websites for the details of their warranty. (Avr jtag STK500 2 in 1 usb emulator programmer is the responsibility of Audrey Jennings) |
a_jennings@cedar--rapids.com (Audrey Jennings) for more information.
