|
EscrowUnlt © AP6.0Package of 3 Thermoelectric Cooler (T couple) Peltier Effect Devices with heat sink and fan assemblies An ideal application for one of these would be to heat/cool your coffee/Iced tea on the way to work or on the boat/RV. Run it on 12 Volts from the lighter socket. By flipping the thing over after heatsinking each side you have a drink heater/cooler. There are hundreds of applications for this low power consumption cutie. Note Peltier devices can be stacked in ascending/descending cascaded arrays, the theoretical limit is one end goes supernova as the other reaches absolute cold. These are guaranteed to have little or no effect on the Martian climate. A safety temperature sensor is included at this price. The specs's are: size:34x31x3.3mm, deltaTmax=79deg C, Qmax=38.7Watts, Imax 3.9A, Vmax=16.1V, Thot= 50deg. These are made by Tellurex under their p/n CZ1-1.0-127-1.27 Large quantity available. This package includes 3 heat sink and fan assembly which can be used in combination with a Peltier device to cool the hot side of these devices. Originally made for a Pentium Slot 1 CPU, this 5" x 2" x 1" cooler can be adapted for a variety of uses. It should be especially useful in cooling applications with TEC's (Peltier Junctions/Thermoelectric Coolers). The Sanyo ACE 109X1612H2016 Fan operates on 12VDC @ 0.06A, the fan is 1/3/4" in diameter. The cooling area on the heatsink measures 1-7/8" x 3-7/8". Ø California addresses will be charged 8.25% Sales Tax (Thermoelectric cooler (t couple) peltier effect devices is the responsibility of Jeffery Roy) |
J-Roy@cedar--rapids.com (Jeffery Roy) for more information.
