|
1-Wiltron Model 560A Scalar Network Analyzer. 2-Wiltron Model 6617 Sweep Signal Generator 10MHz-8GHz Option 02 03. 3-RF detector Model 560-7N50 10MHz-18GHz. ONLY Cosmetically in Good condition The coupler and the other cables are not included. As you see in the pictures a test for a patch antenna . Wiltron Model 560A Scalar Network Analyzer * Measure insertion loss, insertion gain, or RF power with 76dB dynamic range over the 10MHz to 40GHz frequency range. * 76dB dynamic range, -60dBm sensitivity 10MHz to 40GHz coverage * Full compatibility with Wiltron and HP sources * Direct plotter and printer output * Frequency Range: 10MHz to 40GHz with Wiltron 560 Series Detectors and Autotesters. Waveguide adaptor cables are available for higher frequencies * Channels: Two channels may be used to simultaneously display any of the following: A, B, R1, R2, A/R1, A/R2, B/R1 OR B/R2 Wiltron Model 6617Sweep Signal Generator 10MHz-8GHz Option 02 03 Broadband signal source that generates sweep and CW from 10MHz to 8GHz. its output power level is approximately 25dB below the main connector power level Option 2 = 10 dB step attenuator RF detector Model 560-7N50 10MHz-18GHz We don’t use the typical statements other sellers use, such as “Appears To Be Working†and “Right of Returnâ€. Those statements are for sellers that are not confident with their equipment. We provide you with in depth pictures of the unit being tested. Electronic Equipment either work properly or they don’t, there is no gray area. Take a look at our pictures and make an informative decision. Don’t accept dark, meaningless pictures from your Test Equipment Supplier! Returns Will Only Be Accepted If The Item Arrives In A Defective Manner WE HAVE MANY PIECES OF TEST EQUIPMENT AND MANUALS LET US KNOW WHAT WE MAY LIST FOR YOU... (Wiltron 560A 6617 10MHZ-8GHZ rf detector 10MHZ-18GHZ is the responsibility of Melvin Mcmillan) |
melvin_mcmillan@cedar--rapids.com (Melvin Mcmillan) for more information.
