|
This listing is for the following: in case with a couple drill bits too. Outstanding bargain compare to new Here is some info on this unit. From the ManufacturerBosch 11236VS Rotary Hammer The Bosch 11236VS 7.5 amp hammer runs on a variable-speed 0 to 850 rpm motor with 0 to 3,900 beats per minute. The hammer's Vario-Lock positioning enables the user to rotate and lock the chisel into 36 different positions to optimize the working angle. The unit features three operational modes for versatility: hammer only, for light chipping applications with chisels; rotation only, for drilling wood, steel, and building materials with optional chuck; and hammer/rotation, for drilling concrete, brick, stone, and masonry. The tool's maximum capacities are 1-1/8 inches in concrete, 1/2 inch in steel, 1-1/4 inches in wood, and 4 inches in thin-wall core bit. Includes 360-degree auxiliary handle, depth gauge, and carrying case. Drilling, Chiseling, Crushing, Grooving, Edging, Cutting, Stripping, Compacting, Tamping, Roughing -SDS-Plus bit system offers tool-free bit changes with automatic bit locking, dust protection, and maximum impact-energy transfer rate -Multifunction selector offers 3 modes of operation: rotation-only, rotary hammer, and hammer-only mode -Variable-speed 3-finger trigger delivers better operator control and accurate bit starting -Vario-Lock positioning rotates and locks chisel into 36 different positions to optimize working angle -Padded rear handle absorbs shock for operator comfort -360-degree auxiliary handle with built-in depth gauge delivers wide range of movement, along with consistent drilling depth -Integral clutch helps minimize torque reaction -No-load speed: 0 to 850 rpm -No-load beats per minute: 0 to 3,900 bpm -Impact energy: 2.6 ft./lbs. -Max hole diameter in concrete: 1-1/8 inches -Max hole diameter in concrete (thin-wall core bit): 3 inches -Max hole diameter in wood: 1-1/4 inches -Optimal concrete capacity range: 1/4 to 7/8 inch (Bosch 11236VS rotary hammer drill is the responsibility of Callie Noel) |
Callie_Noel@cedar--rapids.com (Callie Noel) for more information.
