|
Fluke Philips PM5193SM Programmable Synthesizer / Function Generator, 50 MHz * Description: The Fluke Philips PM5193 SM Programmable Synthesizer / Function Generator offers a comprehensive choice of waveform functions, AM, FM, gating and burst modes extend flexibility, and can be modulated either internally by the generator, or by an external source. Linear and logarithmic sweeps with fully independent start and stop frequencies and sweep times can also be made with three different sweep modes (sweep and flyback, sweep and hold, sweep up and down). * Quartz crystal precision: The quartz crystal precision of this generator gives you the assurance of reproducible frequency settings within very closely defined limits. Aging rates for these crystals are l ess than 1 p.p.m./year. Coupled with the negligible setting error (<1 p.p.m / year), this generator gives you true longterm reference performance. * 10 MHz external synchronization: For applications demanding traceability to an external standard, the PM 5193SM generator can be synchronized with external standards at 10 MHz, or sub-harmonics such as 1, 2 or 5 MHz. * Simple, menu-controlled operation: To change a setting, all that's needed is to make a selection from the 5-line menu and operate the corresponding buttons. Specific functions can be accessed directly via control buttons which are conveniently located in a separate field. For example: store or recall of instrument-settings. Numeric values are set precisely by a large rotary control (which can be disabled to secure the setting). At all times, you get a clear indication of the instrument setting by the large backlit LCD display. * Accurate setting of modulation parameters: Modulation parameters such as modulation depth, deviation, number of cycles and start/stop phase can be set with high accuracy. The modulation/trigger source is programmable with a wide frequency range of 1 mHz to 100 kHz, and an accuracy of 0.1%. The sweep parameters fstart, fstop, time, lin/log and sweep mode are independently programmable. * Versatile modulation mode selection: Modulation modes such as AM, FM and sweep are selected from the modulation mode menu. All waveforms can be modulated, even the user defined arbitrary waveforms. The burst mode can be triggered via the internal modulation/trigger source or via the external modulation input. Bursts may also be manually triggered by a front panel key. The single-shot mode in burst can be used with all waveforms, including arbitrary. * Arbitrary waveform function via GPIB/IEEE-488 / RS232 link: With GPIB/IEEE-488 or RS232 installed, provide the versatile arbitrary waveform capability, a powerful aid to the generation of custom test signals. User defined arbitrary waveforms can be created and modified on a PC, using Fluke's AnyWave™ software package. and then downloaded to the generator. A waveform captured by a Digital Oscilloscope can also be transfered to a PC and modified by the same software. This package is a powerful tool for creating, capturing and modifying the desired signals, and transferring them quickly and easily to the function generator. * Wide frequency range: 0.1mHz to 50 MHz * Quartz crystal precision for long-term stability * Full range of standard waveform functions * Choice of internal and external modulation modes * 8-digit resolution for high precision * Programmable settings speed operation * IEEE-488 interface standard * Versatile rear-panel inputs and outputs * 10 MHz external synchronization * 10 Standard waveforms: sine, triangle, square, pos/neg pulse, pos/neg/ sawtooth, sine, trainle pulses and haversine * Internal and external modulation modes: AM, FM, Lin. Sweep, Log. Sweep and Burst * 18 Setting memories to store frequently used settings * Programmable modulation frequencies * Output voltage of 40 Vpp for all waveforms, including arbitrary * 24 Arbitrary waveform memories * Arbitrary functionality supported via AnyWave™ software package (not included) * Arbitrary-waveforms, Gate and PSK modulation * Selectable output impedance, 50½ or 600½ * Cosmetic Condition: Good - Some scuffs/scrapes, but not too bad * Working Condition: Presumed Good but Untested * Other Comments / Notes: None * Warranty: Rest assured that your purchase includes a 3-day DOA Guarantee. If the item is DOA, you will need to notify us within 3-days of receipt. Item(s) must be returned in the same condition as received within 7 days of receipt. (See below for further details). We strongly recommend that you properly pack and insure the package against loss or damage. It is ultimately your responsibility that your returned product arrives at our location within the allotted return time frame in the same condition it was sent. (Fluke philips PM5193 sm synth function generator 50 mhz is the responsibility of Naomi Flores) |
N_flores@cedar--rapids.com (Naomi Flores) for more information.
