Cedar Rapids Free Classifieds and Ads   >   Industrial Equipment   >   Taylor   >   Repair and Maintenance   >   Anritsu MS8604A digital mobile/cellular radio test set

Anritsu MS8604A digital mobile/cellular radio test set


Anritsu MS8604A digital mobile/cellular radio test set
MS8604A Digital Mobile Radio Transmitter Tester
This Digital Mobile Tester evaluates the major characteristics of transmitters used in the North American Digital Cellular System, Japan's digital mobile telephone system, and cordless telephones.
Ideal for high-speed measurement of carrier frequency, spurious emissions, occupied bandwidth, antenna power, leakage power during carrier-off, transmission ramp-up power, modulation accuracy, leakage power of adjacent channel, and signal transmission rate of digital mobile transmitters.
* Quick configuration for different communication systems
* One-touch selection of measurement items
* Direct measurement with broadband power sensor
* Internal calibration signal
* Measurement of antenna power and leakage power during carrier-off
* 13 NADC Measurement Software
* 15 GMSK Measurement Software
* Frequency Range: 100Hz to 8.5GHz
* Max. input level: +40 dBm (10 W)
* Setting Range: 100Hz to 8.5GHz (resolution: 1Hz), 0 to 2 GHz (freq. band: 0), 1.7 to 7.5GHz (freq. band: 1-), 6.5 to 8.5 GHz (freq. band: 1+)
* Preselector range: 1.7 to 8.5 GHz (bands: 1-/1+)
* Span: Setting range: 0 Hz, 100 Hz to 8.5 GHz
* RBW: Setting range: 10 Hz to 3 MHz (3 dB), 1-3 sequence
* Level measuring range: Average noise level to +40 dBm. Average noise level: ≤ -112 dBm
* Reference Level: Setting range: -80 to +40 dBm; Input attenuator: Setting range: 20 to 75 dB in 5 dB steps
* Detection mode: POS PEAK, SAMPLE, NEG PEAK
* AM/FM demodulation: Demodulated waveform display and monitoring demodulated audio signal with internal speaker
* Frequency Range: 100 kHz to 5.5 GHz
* Level Range: -20 to +20 dBm
* Applicable power sensor: MA4601A (Not included)
* External Memory: one slot
* Direct plotting: can hard-copy screen via GPIB 2
* GPIB 1 - As device controlled by host
* GPIB 2 - Controls other instruments as controller
Excellent condition both functionally and visually.
(Anritsu MS8604A digital mobile/cellular radio test set is the responsibility of Colette Bruce)
Contact: C_Bruce@cedar--rapids.com (Colette Bruce) (actual email hidden)
Contact C_Bruce@cedar--rapids.com (Colette Bruce) for more information.

Flag any violation to moderator

Your flag message:




Anritsu MS8604A digital mobile/cellular radio test set