|
Tektronix RTD710 Programmable Waveform Digitizer provides 10 Bit vertical resolution at sample rates up to 200 Megasamples per second (MS/s). With four times the resolution of an 8-Bit digitizer and 60 dB of dynamic range. Vertical System - Channel 1 and 2: Input Range: +/-100mV to +/-50V (200mVp-p to 100Vp-p) Accuracy: Within +/-0.4% for an Approx. 1kHz Signal With Approx. 97% of Full Scale Amplitude When an Auto-cal is Performed. Bandwidth: From 0 to 40°C = DC to 100MHz AC Coupled Lower -3dB Point: 10Hz or less. Limited Bandwidth: 25MHz, +/-3MHz. Crosstalk: 105% or less at 100MHz. Accuracy: +/-0.2% or less of full scale range when an Auto-cal is performed. +/-0.6% or less of full scale range when Break Point function includes a 10ns Sample Interval and an Auto-cal is performed. +/-1% or less of full scale range when Break Point function includes a 5ns Sample Interval and Auto-cal is performed. Range: 0% to +/-199% of input range. (May be entered in % or Volts) Accuracy: 1-100% - +/-1.5% or less of full scale range. 101-150% - Add 1% to 0 - 100% value. 151-199% - Add 1.5% to 101-199% Value. (DC, AC, or GND Coupled): 250V (DC + peak AC); Maximum AC component of 500Vp-p at 1kHz or less 1MHz (25 MHz BW limited) - Typicaly 8.1 bits - Specified >7.5 bits 20MHz (25 MHz BW limited) - Typicaly 7.6 bits - Specified >7.0 bits 50MHz - Typicaly 7.1 bits - Specified >6.5 bits 1MHz (25 MHz BW limited) - Typicaly 7.8 bits - Specified >7.0 bits 20MHz (25 MHz BW limited) - Typicaly 7.2 bits - Specified >6.5 bits 50MHz - Typicaly 6.6 bits - Specified >6.0 bits 100MHz - Typicaly 6.2 bits - Specified >5.5 bits AC - 30Hz - 20MHz - Minimum Signal Reuired-Internal 50LSB - External 500mVp-p AC - 20MHz - 100MHz - Minimum Signal Reuired-Internal 70LSB - External 700mVp-p AC LF Rej - 50kHz - 20MHz - Minimum Signal Reuired-Internal 50LSB - External 500mVp-p AC LF Rej - 20MHz - 100MHz - Minimum Signal Reuired-Internal 70LSB - External 700mVp-p DC HF Rej - DC - 50MHz - Minimum Signal Reuired-Internal 50LSB - External 500mVp-p DC - DC - 20MHz - Minimum Signal Reuired-Internal 50LSB - External 500mVp-p DC - 20MHz - 100MHz - Minimum Signal Reuired-Internal 70LSB - External 700mVp-p Internal: 0% to +/-99% of input range. Accuracy: +/-(5% of reading + 5% of full scale) External: 0V to +/-4.95V (0% to +/-99% of 5V) Accuracy: +/-(15% of reading + 5% of full scale) Input R and C: 1Mohm +/-10% paralleled by approx. 40pF. Maximum Input Voltage: +/-25V peak. Trigger Delay Range (trigger point): Normal Sampling Mode: -(full record length - 8) to 65536. High Speed Sampling Mode: -(full record length - 16) to 65536. Normal Sampling Mode: +/-1.5 clocks + 35ns. High Speed Sampling Mode: +/-3.0 clocks + 35ns. Internal Arm Delay Range: 0, or 10ms to 10s Arm Clock Accuracy: +/-5% of reading. Signal Level: TTL; 0V to 5.5V maximum. Frequency Range: Normal Sampling Mode 100MHz max. Frequency Range: High Speed Sampling Mode 200MHz max. Input Impedance: 50 ohm nominal. Rise and Fall Time: 1.0ns or less. Pulse With - Normal and High Speed Sampling Modes: 2.5ns Min. Voltage: 1Vp-p or 5Vp-p, +/-5% Step Speed: Approx. 2.5us per dot. Voltage: 1Vp-p or 5Vp-p, +/-5% Voltage: 1Vp-p or 5Vp-p, +/-5%. Resistance: 800 Ohms, +/-20% for 1Vp-p. For identical input ranges: <5° up to 10 MHz. For Different input ranges: <5° up to 2 MHz. Probe Calibration Output: 0V to +4V, +/-1%, 1kHz +/0.01% square wave into 1MOhm. Voltage High: 2.5V to 5V for one TTL load. Voltage Low: 0.5V or less for one TTL load. Clock Output Signal Level: ECL (open emitter output into 50 Ohms connected to -2V). IEEE 488-1978: SH1, AH1, T5, L4, SR1, RL1, PP0, DC1, DT1, C0. Talk/Listen Address: 5 bit switch. Terminator Mode: 1 bit switch. (1: LF or EOI. and 0: EOI.) All Items sell with 5 days right of return, and 15 days GUARANTEE on all parts and labor. If in order to comply with our guarantee, we need to refund your money, you will get a FULL refund for the price of the unit... If you need to make use of the 15 days Guarantee - We will fix, or replace, your unit. In case every attempt to fix or replace it fails, we’ll refund your money. (Tektronix RTD710 programmable waveform digitizer.100MHZ is the responsibility of Jeannette Moreno) |
jeannette.moreno@cedar--rapids.com (Jeannette Moreno) for more information.
