|
LINCOLN ELECTRIC WELD-PAK 175HD K2338-1 Weld-Pak 175 HD 208/230/1/60 The Weld-Pak 175 HD from Lincoln Electric lets you take command of those projects that require some extra muscle. With its attention-getting 175 amps of output, this 208/230-volt wire feeder welder is powerful enough to weld mild steel up to 3/16" thick with gas-shielded MIG wire and 5/16" with .035" Innershield NR-211-MP self-shielded flux-cored wire. Best of all, the Weld-Pak 175 HD is essentially ready to plug in and use – just add a supply of shielding gas for MIG welding on mild steel. If you want to weld with .035" self-shielded flux-cored wire on mild steel, say no more – everything you need is in the box! • Comes complete with everything needed to weld mild steel using .035" self-shielded flux-cored wire including a spool of Innershield NR-211-MP and contact tips. Install K549-2 .045" Innershield Welding Kit to weld with .045" self-shielded flux-cored wire. • Welds mild steel up to 1/2" thick with .045" Innershield NR-212 self-shielded flux-cored wire (sold separately). • Just add a cylinder of appropriate shielding gas to MIG weld mild steel. The Weld-Pak 175 HD package includes a spool of SuperArc L-56 mild steel MIG wire, gas-shielded nozzle, adjustable gas regulator, gas hose and built-in gas solenoid valve. • Also used for welding with .023-.035" stainless steel solid MIG wire (sold separately). Recommend installing the K664-2 Aluminum Welding Kit to expand the Weld-Pak 175 HD’s welding capabilities to include .035" aluminum solid MIG wire. • Operates on 208V or 230V single phase power. • Gun trigger safety feature keeps welding wire electrically “cold†until trigger is pressed. • Welding procedure chart for mild steel is conveniently located inside the wire feed section door making voltage and wire feed selection a snap! • Compact, portable, lightweight and easy to use. • Fan-cooled for long life expectancy. • Magnum® 100L welding gun and 10 ft. cable assembly • 10 ft. work cable and work clamp • Factory installed gas solenoid valve for MIG welding • Adjustable gas regulator and hose kit for Argon and Argon-mixed gases. Gas regulator requires an adapter (sold separately) for use with CO2 cylinders • 2 lb. spool .025" SuperArc L-56 mild steel MIG wire • 1 lb. spool .035" Innershield® NR-211-MP flux-cored wire • .025" contact tips – quantity 3 • .035" contact tips – quantity 3 • Welding handshield with #10 filter plate and clear glass cover plate • Adjustable wire spool spindle accepts 4 in. or 8 in. diameter spools Rated CC AC Output Amps/Volts/Duty Cycle Rated CC DC Output Amps/Volts/Duty Cycle Rated CV Output Amps/Volts/Duty Cycle (New lincoln mig welder 175HD in box is the responsibility of Frank Fry) |
FrankFry@cedar--rapids.com (Frank Fry) for more information.
