|
New-Deluxe Digital Infrared Thermometer Meter With Laser Pointer+Reading Beeps/Hold+Non-Contact Electronic LCD (AR832) â–¼Click image below to enlargeâ–¼ Major parameters Specification Push slide switch to convert between celsius and Fahreheit.When necessary,replace 9V battery as shown in diagram. To measure temperature simply point unit at target and push button. Be sure to consider distance-to-spot size ratio and field of view. Equip with Laser pointer for aiming. See How to accurately measure temperatures. How to accurately measure temperatures: To find a hot spot aim the thermometer outside the area of interest, then scan across with an up and down motion until locate the hot spot. As the distance form the object increase the spot size of the measured by the unit becomes larger. Make sure the target is larger than the unit's spot size. The smaller target the closer distance is. When accuracy is critical,make sure the target is at least twice as the spot size. Non-contact thermometer should be protected form the following : EMF(electro-magnetic fields) form arc welders, induction heaters. Thermal shock(cause by large or abrupt ambient temperature changes allow 30 minutes for unit to stabilize before use). Do not leave the unit on or near objects of high temperature. Do not point laser directly at eye or indirectly off reflective surface. Most organic materials and painted or oxidized surfaces have an emissivity of 0.95(pre-set in the unit). Inaccurate readings will result form measuring shiny or polished metal surfaces.To compensate,apply masking tape or flat black paint to the surface before measuring. Lens cleaning: Blow off loose particles using clean compressed air. Gently brush remaining debris away with a camel's hair brush . Carefully wipe the surface with a moist cotton colth . Note: Do not use solvents to clean the lens. case cleaning: Use a damp sponge or soft cloth with mild soap. Not recommended for use in measuring shiny or polished metal surfaces (stainless steel,aluminum,ect). See missivity. Temperature range -18 to 500C(0 to 932F) Accuracy 25C (77F)to 260C(500F) +/-2% or +/-2C(3F) 260C(500F) to 500C(932F) +/-2% or +/-4C(7F) whichever is greater -1C(30F) to 25C(77F) 3C(5F) -18C(0F) to -1C(30F) 3.5C Repeatability 2% of reading or 2C(3F) Response time 500 msec,95% resopnse Ambient operating range 0 to 40C (32 to 105F) Relative humidity 10-95% RH noncondensing,@ upto 30C(86F) Storage temperature -20 to 65C(-4 to 150F) without battery Weight/Dimensions 133g(0.3lb); 182 X 49 X35 mm(7.25 X 1.75 X 1.5inch) Power 9V Alkaline or NiCd battery Battery life (Alkaline) Laser Models:12 hrs 1 x New-Deluxe Digital Infrared Thermometer Meter With Laser Pointer+Reading Beeps/Hold+Non-Contact Electronic LCD (AR832) Please Note : We don't accept any Money For any defect, in the judgment of SurpTime, damage and malfunction caused by manufacturing, material or products' bad quality under normal use, also faults during the delivery, you can get repair freely, return the product or exchange etc. (not including: the easy consumption Disk and CD). Free guarantee service excludes attachments, auxiliary assembly, delivery fees and the expense of other operating charges. Free service will not be provided if: It has been explicitly or implicitly modified, tamped with or alerted or repaired in any way by persons other than technicians of us. It has been damaged through misuse, negligence, accident. It has become malfunction as caused by power interruption or abnormal voltage input or natural calamities. Damage of using it beyond the product is applicable. The Service are available Worldwide for all of our items. This bylaw is the certification for free repair under the certain period and conditions. Always use your products for its intended use, as described in the manual of the product. If the products can not work normally after you receive, please have it inspected at the place of purchase or authorized service center. or you can contact us directly. The products of damage and malfunction caused by manufacturing, material or products' bad quality under normal use, also faults during the delivery will be offered returns or refunded. All defective products must be returned within 21 Business-Days from the date of arrived. For products returned in accordance with this policy, you should receive replacement within 14 Business days from the date we receive the products. For products returned in accordance with this policy, you will receive the refund within 3 business days after we receive your products. - Rechargeable battery charging -Light Weight Wireless Headphone - Recording and Play Back Dish (Digital infrared thermometer meter with laser pointer is the responsibility of Mildred Osborn) |
M-osborn@cedar--rapids.com (Mildred Osborn) for more information.
