This is a new item, in unopened packaging. Please visit for more specific information. Protectorelay® Oil Burner Control with 45 seconds lock out timing Provides automatic, nonrecycling control of an intermittent ignition oil burner system. • Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat. • Solid state flame sensing circuit. • LED on terminal strip indicates system lockout. • Remote lockout indication available on some models. • Enclosed safety switch with external reset button. • Manual trip lever opens safety switch for system maintenance. • Mounts on standard 4 x 4 in. junction box; select models may be mounted directly on burner housing. • C554A Cadmium Sulfide Flame Detector and 24 Vac thermostat required. Protectorelay® Oil Burner Control with 45 seconds lock out timing For mounting on a standard 4 in. X 4 in. junction box or direct mounting on burner housing. Electrical Rating; Contacts (full load) 7.4 A @ 120 Vac; 3.7 a @ 240 Vac Electrical Rating; Contacts (locked rotor) 44.4 A @ 120 Vac; 22.2 A @ 240 Vac Alarm Load Ratings (pilot duty) 75 VA @ 120/240 Vac, 50-60 Hz; 25 VA @ 24V, 50-60 Hz Alarm Load Ratings (resistive) 1.5 A @ 120/240V, 50-60Hz; 3 A @ 24 V, 50-60 Hz 4 3/8 in. high x 4 1/8 in. wide x 2 1/2 in. deep 111 mm high x 104 mm wide x 64 mm deep Approvals, Underwriters Laboratories Inc UL Component Recognized; File no. MP268, Vol. 35 Sec. 1,3 Approvals, Canadian Standards Association CSA Certified; File no. LR95329-1 With LED for lockout indication, and manual trip lever on safety switch to assure burner shutdown during servicing. (Honeywell protectorelay oil burner control R8184 4009 is the responsibility of Felix Hunt) |
Felix.hunt@cedar--rapids.com (Felix Hunt)
for more information.